Abstract:
Super-magnets, materials whose strong magnetic activity is an attractive differential for the hightech industry, may have their magnetic performance affected by small variations in their chemical composition. For example, the neodymium and praseodymium content can change the physicochemical properties of the permanent magnets. Aiming at a strict chemical quality control, this work developed an analytical method to quantify the major elements in the materials involved in the production process of didymium (the mixture of neodymium and praseodymium) super-magnets. The simultaneous determination of Nd (401.225 nm), Pr (414.311 nm), Fe (259.837 nm) and B (249.678 nm) in three different sample types (didymium oxide, metallic didymium and (Nd,Pr)-Fe-B alloy) was performed by sample dissolution in acidic media, followed by instrumental measurements using an Inductively Coupled Plasma Optical Emission Spectrometer. Linear calibration curves were obtained with high coefficient of determination (0.9983 ≤ R2 ≤ 0.9999) and with appropriate limits for determining these elements at the percentage level, reaching detection limits less than 0.07 cg g-1. The precision of the method was improved by weighing of the solutions during all the dilution steps and was evaluated by the coefficient of variation associated to instrumental precision (0.3 – 0.7%), method intermediate precision (1.9 – 3.1%) and also by the typical mass fraction provided as uncertainty (0.04 – 0.20 cg g-1), reaching the pressing need to distinguish the content of the rare earth elements in less than 1 cg g-1. The accuracy of the method was assessed by spiked and recovery test (96-104% for spikes equal to or greater than 0.50 cg g-1) and also by the use of different analytical methods, involving the participation of other laboratories, obtaining an acceptable degree of agreement (85 – 107%).
Reference:
PAPAI, Rodrigo; FONSECA, Karina Torre da; ALMEIDA, Gilmar Alves de; SILVA, André Luiz Nunis da; NAGASIMA, Thiago Pires; JABES, Eduardo Gimenes; SANTOS, Célia Aparecida Lino dos; LANDGRAF, Fernando José Gomes; LUZ, Maciel Santos. Chemical characterization in the production chain of permanent magnets by inductively coupled plasma optical emission spectrometry (ICP OES). Brazilian Journal of Analytical Chemistry, v.9, n.36, p.124-145, 2022.
Access to the article on the Periodical website:
https://brjac.com.br/artigos/brjac-108-2021.pdf
Super-magnets, materials whose strong magnetic activity is an attractive differential for the hightech industry, may have their magnetic performance affected by small variations in their chemical composition. For example, the neodymium and praseodymium content can change the physicochemical properties of the permanent magnets. Aiming at a strict chemical quality control, this work developed an analytical method to quantify the major elements in the materials involved in the production process of didymium (the mixture of neodymium and praseodymium) super-magnets. The simultaneous determination of Nd (401.225 nm), Pr (414.311 nm), Fe (259.837 nm) and B (249.678 nm) in three different sample types (didymium oxide, metallic didymium and (Nd,Pr)-Fe-B alloy) was performed by sample dissolution in acidic media, followed by instrumental measurements using an Inductively Coupled Plasma Optical Emission Spectrometer. Linear calibration curves were obtained with high coefficient of determination (0.9983 ≤ R2 ≤ 0.9999) and with appropriate limits for determining these elements at the percentage level, reaching detection limits less than 0.07 cg g-1. The precision of the method was improved by weighing of the solutions during all the dilution steps and was evaluated by the coefficient of variation associated to instrumental precision (0.3 – 0.7%), method intermediate precision (1.9 – 3.1%) and also by the typical mass fraction provided as uncertainty (0.04 – 0.20 cg g-1), reaching the pressing need to distinguish the content of the rare earth elements in less than 1 cg g-1. The accuracy of the method was assessed by spiked and recovery test (96-104% for spikes equal to or greater than 0.50 cg g-1) and also by the use of different analytical methods, involving the participation of other laboratories, obtaining an acceptable degree of agreement (85 – 107%).
Reference:
PAPAI, Rodrigo; FONSECA, Karina Torre da; ALMEIDA, Gilmar Alves de; SILVA, André Luiz Nunis da; NAGASIMA, Thiago Pires; JABES, Eduardo Gimenes; SANTOS, Célia Aparecida Lino dos; LANDGRAF, Fernando José Gomes; LUZ, Maciel Santos. Chemical characterization in the production chain of permanent magnets by inductively coupled plasma optical emission spectrometry (ICP OES). Brazilian Journal of Analytical Chemistry, v.9, n.36, p.124-145, 2022.
Access to the article on the Periodical website:
https://brjac.com.br/artigos/brjac-108-2021.pdf
